installation & assembly

NauticDock – Connection Pin

Connection pins are used to connect floats.

Add 4 different corners together, identified by the numbers. Number 1 is always the top one, followed by 2, 3 and 4.

Insert the Connection Pin and tighten the pin with the Installation Tool.

NauticDock – V-connection Pin

The V-connection Pin is used to connect 2 floats with 2 V-floats.

Add 4 different corners together, identified by the numbers. Number 1 is always the top one, followed by 2, 3 and 4.

Insert the V-connection Pin and tighten the pin with the Installation Tool. Make sure the pin is secured!

NauticDock – Connecting Bolt

The Connecting Bolt is used to connect 2 or 3 Floats.

The numbers of the corners must be consecutive.

Insert the Connecting Bolt and hand-tighten the nut on the bolt.

Insert the Connecting Bolts alternately, starting from the side.

NauticDock – Spacer

The Spacer is used on one side of the system. The Spacer fills the space when installing the Connecting Bolt.

When connecting 2 Floats, the Spacer 32mm is used. When connecting 3 Floats, the Spacer 16mm is used.

Place the Spacer between the loops of the Floats. Insert the Connecting Bolt and hand-tighten the nut on the bolt.